4 production processes of customized bottle lid

customized bottle lid are an important part of wine packaging.

High-quality customized bottle lid can ensure the quality of wine transportation and reduce transportation losses.

High-quality anti-counterfeiting bottle caps are inseparable from excellent production technology.

Only when the technology is in place can high-quality anti-counterfeiting bottle caps be produced.

The following is a detailed introduction to the production process of anti-counterfeiting bottle caps in Lianyungang Jinding Caps.

customized bottle lid

Prepare mixed ingredients of customized bottle lid

Generally, the production material of liquor bottle lid is plastic.

If the user needs to make metal or ceramic customized bottle lid, iron, aluminum, porcelain, mud, etc. should be selected as raw materials.

In strict accordance with customer needs and quality standards, select high-quality raw materials.

If the customer needs to make metal or ceramic anti-counterfeiting wine bottle caps, they should choose iron, aluminum, porcelain, clay, etc. as the raw material.

Mix and save the main ingredients and auxiliary ingredients.

Hot Melt of customized bottle lid

Put the prepared raw materials into the compressor barrel, and heat it to a semi-molten flow plasticization state.

At this time, it is necessary to ensure that the temperature in the barrel reaches about 200 degrees, so that the raw materials are melted and fully fused after heating.

This process is very important in the production of customized bottle lid, and temperature control will directly affect the quality of products after production.

into the mold

The raw materials that have been fully heated and fused in the barrel are released in a certain amount and extruded into the mold cavity. Close the upper and lower molds to shape the product.

The customized bottle lid mold must be carefully made to ensure that the error of the product shape is reduced to a very low level.

Cooling and demoulding

Allow the heated product to cool sufficiently in the mold cavity, but do not cool rapidly, otherwise it will affect the quality of the customized bottle lid.

When the caps are finished cooling, they are released from the mold and undergo a post-ring and padding workflow.

explaination of bottle stopper from Wikipedia

Table of Contents

Share This Post

Recent Post

Contact ASTRID

you may also like